Home › DIY guides › Install peel and stick backsplash tile
Difficulty Easy
Time 2-4 hours
Materials $108–$323
Steps 5
Easy 2-4 hours
Ensure the surface is clean and dry before installation.
Do it yourself
parts & materials, about 2-4 hours of your time
Hire a pro
typical all-in price
Rough estimates for guidance only — actual costs vary by job, materials and local prices.
Get real quotes .
Utility knife Measuring tape Level Squeegee
Peel and stick backsplash tile
Typically need: ~10
Tile adhesive (optional)
Typically need: 1
Caulk (for edges)
Typically need: 1
Estimated materials total: $108–$323 . Prices vary by region and retailer.
1
Prepare the surface
Clean the wall surface thoroughly to ensure proper adhesion of the tiles.
30 min
Ensure the surface is dry before proceeding.
2
Measure and mark layout
Use a measuring tape and level to mark where the tiles will be placed for a straight installation.
30 min
Measuring tape Level
3
Cut tiles as needed
Use a utility knife to cut tiles to fit around outlets and corners.
30 min
Utility knife
4
Apply tiles
Peel the backing off the tiles and press them onto the wall, starting from the bottom and working your way up.
1-2 hours
Squeegee
5
Seal edges with caulk
Apply caulk along the edges of the tiles to create a finished look and prevent moisture infiltration.
30 min
Safety rules
Ensure the wall surface is clean and dry before installation. Use a level to ensure tiles are installed straight.
Check locally
Check local building authority for any specific regulations regarding wall coverings.
Describe the job and get matched to vetted local pros — free, in seconds, no account needed.
Get local quotes →
This guide is AI-generated for general help and may not fit your exact situation. Know your limits — when in doubt, hire a licensed pro.
We use cookies to run this site and to measure traffic. You can decline anytime with no loss of functionality — and in the EU/UK we wait for your consent before measuring. See our Privacy Policy .
Reject non-essential Accept all