Always disconnect the power before working on the garage door.
Do it yourself
$50–$105
parts & materials, about 1-2 hours of your time
Hire a pro
$100–$200
typical all-in price
Rough estimates for guidance only — actual costs vary by job, materials and local prices. Get real quotes.
Tools you'll need
LadderSocket wrenchScrewdriver
Parts & materials
Garage door lubricant
Typically need: 1
$5-$15
per each
White lithium grease
Typically need: 1
$5-$10
per each
Replacement rollers
Typically need: 4
$10-$20
per each
Estimated materials total: $50–$105. Prices vary by region and retailer.
Step by step
1Disconnect powerUnplug the garage door opener or disconnect the power to ensure safety while working.10 min
2Inspect the doorCheck for any visible damage or wear on the door, tracks, and hardware.15 min
3Lubricate moving partsApply garage door lubricant to the hinges, rollers, and tracks to ensure smooth operation.20 minLadderAvoid over-lubricating, which can attract dirt.
4Tighten hardwareUse a socket wrench to tighten any loose bolts or screws on the door and tracks.15 minSocket wrench
5Replace worn rollersIf any rollers are damaged, replace them with new ones for better performance.30 minScrewdriverBe careful when removing and installing rollers to avoid injury.
6Reconnect powerPlug the garage door opener back in and test the door for proper operation.10 min
Permits, safety & disposal
Safety rules
Disconnect power before working on the garage door.
Wear safety goggles when working with tools.
Check locally
Check local regulations for any specific requirements in Naperville, IL.
Rather not do it yourself?
Describe the job and get matched to vetted local pros — free, in seconds, no account needed.
We use cookies to run this site and to measure traffic. You can decline anytime with no loss of functionality — and in the EU/UK we wait for your consent before measuring. See our Privacy Policy.